User's Manual

©2006 Nordic ID Oy
Nordic ID PL3000 user manual, v. 2.6, October 2006 74
Page 3 : User Interface Confi guration 2 of 2
The UI application displays the current network link
state, there are three possible states. The UI application
always starts out in the “Reconnecting” state. It remains
in this state until either the network link is re-established
or the LWD service reconnect attempt is timed out. If
the link is re-established the UI application displays
the “Connected” state message. If the timeout occurs,
the “Connection Lost” state message is displayed.
Please note that even in the connection lost state, the
LWD service is constantly monitoring the link state.
Should the link state change to up, the state message
in the UI application will automatically change to the
“Connected” state. Each state has three text fi elds
you may confi gure to say whatever you wish in any
supported language. They should be set so that they
promptly and without confusion inform the user about
what is happening. The “State Message Header” is
a one line header in big bold font at the top of the UI
application window. The “State Message Body” is a
multiline text fi eld that you may use to convey a short
message to the user describing the current state. The
“State Status Text” fi eld is a bold text line intended to
inform the user about what the LWD service is currently
doing.