Use and Care Manual

The Plow is not flush to the ground when angled:
In the angled position, the blade will not be flush to the ground if the top pivot and bottom pivot plates are
reversed.
The Plow flips forward when plowing:
Adjust the boots and axle so that the axle is 7” (178mm) from the ground.
The T-Handle is hard to insert:
The top and bottom pivot bolt must be loosened to allow for some movement in the metal plates.
The Plow is heavy to lift while plowing:
This has occurred because snow, sand, dirt, etc. has accumulated on the blade. You should reverse the
machine to clear the blade of the material before lifting the blade with the strap or winch.
The Belly Plate is heavy to install:
We recommend that you prop the 20lb belly plate up with wood or car jacks before attaching to your
machine. It will make lining up the bolts and brackets much easier.