User Manual

16
14. Set the console assembly (K) on the brackets on
the Handrails (86); do not pinch any wires.
Attach the console assembly (K) with the four
5/16" x 3/4" Screws (4) that you removed in step
10 and four 5/16" Star Washers (11); do not
fully tighten the Screws yet.
Next, insert the excess Upright Wire (81) into
the console assembly (K). Then, pull the two ties
(M) tight against the Upright Wire and cut off the
ends of the ties.
14
86
K
4
4
81
86
11
11
15. Attach the Pulse Crossbar (93) to the console
assembly (K) with four #8 x 1/2" Screws (1);
start all four Screws, and then tighten them.
Then, firmly tighten the four 5/16" x 3/4"
Screws (4).
15
93
4
K
4
1 1
16
11
4
11
90
89
41
4
16. Carefully slide the Upright Crossbar (41)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar with the four
5/16" x 3/4" Screws (4) that you removed in step
6 and four 5/16" Star Washers (11); start all four
Screws, and then tighten them.
M