Owner's Manual

10
10. Attach the Foot Frame (19) to the Leg Frame
(10) with two M10 x 40mm Button Bolts (69)
a
nd two M10 Locknuts (65).
11. Slide two Foam Pads (22) onto the Lock
Frame (11). Then, press two Pad Caps (45)
into the Foam Pads.
Next, pull the indicated Long Adjustment Knob
(13), insert the Lock Frame (11) into the Leg
Frame (10), and then release the Long
Adjustment Knob.
Make sure that the Long
Adjustment Knob is engaged in the indicat-
ed adjustment hole in the Lock Frame.
Insert an M6 x 37mm Bolt (33) into the Leg
Frame (10) and into the loop on the end of
the Spring (17). Tighten an M6 Nut (43) onto
the Bolt.
12. Insert the Pad Tube (18) into the welded tube
on the Leg Frame (10). Next, tighten an M4 x
15mm Screw (58) into each side of the Pad
Tube. Slide two Foam Pads (22) onto the Pad
Tube. Then, press two Pad Caps (45) into the
Foam Pads.
10
10
69
65
19
11
10
43
33
11
17
Hole
22
22
45
45
13
12
10
22
22
18
58
45
45