Owners manual

25
MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE
Inspect and tighten all parts of the exercise bike
regularly. Replace any worn parts immediately.
To c l ean the e xerc ise b ike , use a d a mp c loth and a
small amount of mild soap. IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
CONSOLE TROUBLESHOOTING
If the console does not display your heart rate when
you use the handgrip heart rate monitor, see step 5 on
page 18.
If lines appear in the console display, see HOW TO
CHANGE CONSOLE SETTINGS on page 23 and
adjust the contrast level of the display.
If a replacement power adapter is needed, call the
telephone number on the cover of this manual.
IMPORTANT: To avoid damaging the console, use
only a manufacturer-supplied regulated power
adapter.
HOW TO ADJUST THE DRIVE BELT
If the pedals slip while you are pedaling, even while the
resistance is adjusted to the highest setting, the drive
belt may need to be adjusted. Before you adjust the
drive belt, unplug the power adapter.
With the help of a second person, first place some
sturdy packing materials under the frame so that the
front of the frame is lifted off the floor. Have the second
person hold the exercise bike to prevent it from tipping.
Next, tighten the indicated M8 Hex Nut (113) slightly to
tighten the Drive Belt (not shown). Then, remove the
packing material from under the frame and plug in the
power adapter.
Repeat this process, if necessary, until the pedals no
longer slip.
113