Owner's Manual

6. Measure your heart rate if desired.

Note: If you use the handgrip pulse sensor and

he optional chest pulse sensor at the same

time, the console will not display your heart

ate accurately. For information on the optional

chest pulse sensor, see page 22.

Before using

the handgrip

pulse sensor,

remove the

sheets of clear

plastic from the

metal contacts.

In addition,

make sure that

your hands are

clean.

To measure your heart rate, stand on the foot

rails and hold the metal contacts on the handrail—

avoid moving your hands. When your pulse is de-

tected, your heart rate will be shown. For the most

accurate heart rate reading, continue to hold

the contacts for about 15 seconds.

. When you are finished exercising, remove the

key from the console.

Step onto the foot rails, press the Stop button, and

adjust the incline of the treadmill to the lowest

setting. The incline must be at the lowest setting

when you fold the treadmill to the storage posi-

tion, or you may damage the treadmill. Next, re-

move the key from the console and put it in a secure

place.

When you are finished using the treadmill, switch

the reset/off circuit breaker to the “off” position and

unplug the power cord. IMPORTANT: If you do

not do this, the treadmillʼs electrical compo-

nents may wear prematurely.

Contacts