Owner's Manual

6. Set the Left Upright Spacer (76) on the Base

(83). Have a second person hold the Left

Upright (74) near the Base. Next, hold a Bolt

Spacer (80) inside the lower end of the Left

Upright. Insert a 3/8" x 4 1/2" Bolt (6) with a 3/8"

Star Washer (9) into the Left Upright and the

Bolt Spacer. Repeat this step with a second

Bolt Spacer (80), 3/8" x 4 1/2" Bolt (6), and

3/8" Star Washer (9). Then, set the Left Upright

in the Left Upright Spacer.

Tighten the 3/8" x 4 1/2" Bolts (6) until the heads

of the Bolts touch the Left Upright (74); do not

fully tighten the Bolts yet.

With the help of a second person, lower the

treadmill so that the Base (83) is flat on the

floor.

5. With the help of a second person, carefully tip

the treadmill onto its right side. Partially fold the

Frame (56) so that the treadmill is more stable;

do not fully fold the Frame yet.

Attach a Base Pad (81) to the Base (83) in the

location shown with a #8 x 1" Tek Screw (2) and

a Base Pad Spacer (13). Then, attach another

Base Pad (81) with only a #8 x 1" Tek Screw (2).

Remove the 3/8" Nut (8) and the 3/8" x 2" Bolt

(4), from the Base (83). Attach a Wheel (84)

with the Bolt and the Nut that you just removed.

Do not overtighten the Nut; the Wheel must

turn freely.

4. Hold a Bolt Spacer (80) inside the lower end of

the Right Upright (78). Insert a 3/8" x 4 1/2" Bolt

(6) with a 3/8" Star Washer (9) into the Right

Upright and the Bolt Spacer. Repeat this step

ith a second Bolt Spacer (80), 3/8" x 4 1/2"

Bolt (6), and 3/8" Star Washer (9). Then, set

the Right Upright in the Right Upright Spacer

(79). Be careful not to pinch the Upright Wire

(

38).

Tighten the 3/8" x 4 1/2" Bolts (6) until the heads

of the Bolts touch the Right Upright (78); do not

fully tighten the Bolts yet.