Owner's Manual

10
8. Identify the Left Handrail (78). Slide a Handrail
Cover (77) onto the lower end of the Left
Handrail. Remove the tie from the bracket on
the Left Handrail.
Insert the bracket on the Left Handrail (78) into
the top of the Left Upright (82) and at the same
time slide the lower end of the Left Handrail onto
the tube on the Left Upright.
Start two 5/16" x 3/4" Patch Bolts (5) and two
5/16" Star Washers (9) into the Left Upright (82)
and the Left Handrail (78). Then, start a 5/16" x
1 1/2" Patch Bolt (4). Do not tighten the Patch
Bolts yet.
Start two 1/4" x 1/2" Patch Bolts (8) into the
lower end of the Left Handrail (78). Tighten all
five Patch Bolts used in this assembly step.
Slide the Handrail Cover (77) against the Left
Upright (82).
78
4
Tie
Tube
Bracket
5
9
8
77
82
8
7. Attach the Base Cover (84) to the Base (94)
with four #8 x 1/2" Screws (1). Be careful not
to overtighten the Screws.
W
ith the help of a second person, tip the tread-
mill so that the Base (94) is flat on the floor.
8
4
94
1
1
1
1
7