Owner's Manual

10
9. Remove and discard the four preassembled
Screws (B).
B
9
B
8. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly.
Remove the eight Screws (A) Note: There may
b
e fewer Screws than shown. Next, lift off the
Crossbar (93) and the Console Frame (104).
Discard the Screws.
93
Console
Assembly
A
8
A
A
104
10. IMPORTANT: To avoid damaging the
Crossbar (93), do not use power tools and
do not overtighten the #10 x 3/4" Screws (9).
Orient the Crossbar (93) as shown. Tighten all
four #10 x 3/4" Screws (9) about halfway into
the Handrails (87, 88). Slide the Crossbar as far
forward as possible and tighten the four Screws.
93
88
9
10
9
87