Owner's Manual

11
12. With the help of a second person, hold the con-
sole assembly near the Left Handrail (88).
Connect the Upright Wire (81) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
Connect the ground wire from the console as-
sembly to the Console Ground Wire (105) and
insert the wires into the hole in the console as-
sembly.
Console
Assembly
Console
Wire
Wire
Tie
88
81
81
Console
Wire
12
Ground
Wire
105
11. Attach the Console Frame (104) to the
Handrails (87, 88) with four 5/16" x 1 1/4" Bolts
(4) and four 5/16" Star Washers (11). Start all
four Bolts, and then tighten each of them.
11
104
87
88
4
11
4
11
Hole