Owner's Manual

13
15. IMPORTANT: See page 15 and plug in the
power cord. Next, see page 17 and turn on
the power.
T
hen, press the Incline increase button
once.
When the frame stops moving, remove the
k
ey from the console and unplug the power
cord.
15
16. IMPORTANT: Before you begin this step,
make sure that you have read and followed
all the instructions in step 15. The incline
must be set at zero percent before you as-
semble the Storage Latch (53).
Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (53) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (53) to
the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (12).
Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x
1 3/4" Bolt (6) and a 3/8" Nut (12). Note: It may
be necessary to move the Frame (56) back and
forth to align the Storage Latch with the Frame.
16
53
12
Large
Barrel
56
6
Latch
Knob
12
3
94
IMPORTANT: Make sure
to follow all instructions
in this step