Owner's Manual

14
19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 26 and 27).
17. Remove and discard the four preassembled
Screws (C).
Attach the Rear Feet (57) to the Frame (56) as
s
hown with four #8 x 3/4" Screws (2).
See step 15. Discard the piece of cardboard.
L
ower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 24).
17
5
7
2
C
C
2
57
56
18. Press the Grommet (77) into the square hole in
the Base (94).
94
77
18