Owner's Manual

28
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
s
peakers, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Locate the audio wire. Plug one end into the audio jack
on the side of the console. Then, plug the other end
into a jack on your MP3 player, CD player, or other
personal audio player. Make sure that the audio wire
is fully plugged in.
Next, press the Play button
on your MP3 player, CD
player, or other personal
audio player. Then, adjust
the volume level on your
personal audio player or
press the Volume increase
and decrease buttons on
the console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
Note: The USB port on the side of the console is for
firmware updates only.
HOW TO ADJUST THE CUSHIONING SYSTEM
Remove the key from the console and unplug the
p
ower cord. The treadmill features a cushioning sys-
tem that reduces the impact as you walk or run on the
t
readmill.
To increase the firmness of the walking platform, step
off the treadmill and use a hex key to turn the cushion
adjustors clockwise until the number of the desired
firmness level appears next to the cushion adjustor.
To decrease the firmness, step off the treadmill and
use a hex key to turn the cushion adjustors counter-
clockwise until the number of the desired firmness
level appears next to the cushion adjustor.
Note: Make sure that both front cushions are set at
the same firmness level and both rear cushions
are set at the same firmness level. The faster you
run on the treadmill, or the more you weigh, the
firmer the walking platform should be.
Volume Increase
Volume Decrease
Cushion
Adjustors
Cushion
Adjustors