Owners manual

14
10. Insert the Upright Wire (81) through one looped
tie (I) and insert the console wire (J) through the
other tie on the console assembly (F).
Connect the Upright Wire (81) to the con-
sole wire (J). The connectors should slide
together easily and snap into place. If they
do not, turn one connector and try again. IF
YOU DO NOT CONNECT THE CONNECTORS
PROPERLY, THE CONSOLE MAY BECOME
DAMAGED WHEN YOU TURN ON THE
POWER. Then, remove the wire tie from the
Upright Wire.
Pull the ties (I) tight around the Upright Wire
(81) and the console wire (J) and cut off the end
of the tie.
10
I
I
J
F
81
11. Tighten two #8 x 1" Screws (50) into the
console assembly (F).
11
50
F
12
64
34
36
1
1
12. Identify the Right and Left Trays (34, 36).
Attach the Trays (34, 36) to the Console Base
(64) with eight #8 x 1/2" Screws (1); do not
overtighten the Screws.