Owners manual

22
HOW TO SET UP THE CONSOLE
Before using the treadmill for the first time, set up the
console.
1. Connect to your wireless network.
Note: In order to access the Internet, download
iFit workouts, and use several other features of
the console, you must be connected to a wireless
network. See HOW TO USE THE WIRELESS
NETWORK MODE on page 31 to connect the
console to your wireless network.
2. Check for firmware updates.
First, see step 1 on page 28 and step 2 on page
30 and select the maintenance mode. Then, see
step 3 on page 30 and check for firmware updates.
3. Calibrate the incline system.
See step 4 on page 31 and calibrate the incline
system of the treadmill.
4. Create an iFit account.
Touch the globe button near the lower-left corner of
the screen and touch the iFit button.
The browser will open to the iFit.com home page.
Follow the prompts on the website to sign up for
your iFit membership. Note: For information about
navigating in the browser, see page 30.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode, see this page. To use an
onboard workout, see page 24. To use a set-a-goal
workout, see page 26. To use an iFit workout, see
page 27.
To use the equipment settings mode, see page 28.
To use the sound system, see page 29. To use the
Internet browser, see page 30. To use the mainte-
nance mode, see page 30. To use the wireless
network mode, see page 31.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 35).
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
21. Note: It may take a minute for the console
to be ready for use.
2. Select the main menu.
When you turn on the power, the main menu will
appear after the console boots up. Touch the home
button in the lower-left corner of the screen to
return to the main menu at any time.
3. Start the walking belt and adjust the speed.
Touch the
Start button
on the screen
or press the
Start button on
the console to
start the walk-
ing belt. You
can also press
the Manual Control button on the console, and
then touch the Resume button on the screen. The
walking belt will begin to move at 1 mph. As you
exercise, change the speed of the walking belt
as desired by pressing the Speed increase and
decrease buttons. Each time you press one of the
buttons, the speed setting will change by 0.1 mph;
if you hold down the button, the speed setting will
change in increments of 0.5 mph.