Owner's Manual

11
10. With the help of a second person, hold the con-
sole assembly near the Right Handrail (79) and
the Left Handrail (not shown).
Connect the Upright Wire (85) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN YOU TURN ON THE
POWER. Remove the wire tie from the Upright
Wire.
Console
Assembly
10
Console
Wire
Wire
Tie
79
85
85
Console
Wire
9. Slide the Right Upright Cover (86) onto the
Right Upright (83).
H
old the Right Handrail (79) near the Right
Upright (83). Insert the Upright Wire (85)
t
hrough the Right Handrail as shown.
Start two 5/16" x 3/4" Patch Bolts (5), and two
5/16" Star Washers (9) into the Right Handrail
(79) and the Right Upright (83). Then start a
5/16" x 1 1/2" Patch Bolt (4). Do not tighten the
Patch Bolts yet. Be careful not to pinch the
Upright Wire (85).
79
9
5
4
83
86
8
5
9