User Manual

17
17. Carefully slide the Upright Crossbar (41)
between the Uprights (89, 90). Attach the Upright
Crossbar with the four 5/16" x 3/4" Screws (4)
removed in step 6 and four 5/16" Star Washers
(11) (only one side is shown). Start all four
Screws, and then tighten them.
17
89
4
11
41
90
88
D
87
95
96
16
16. Tighten a #8 x 3/4" Screw (2) into the Left
Outside Upright Cover (87) and into the bottom
of the left handrail assembly (D). Make sure not
to overtighten the Screw.
Press the Left Inside Upright Cover (88) against
the Left Outside Upright Cover (87) until they
snap together.
Repeat the steps above on the other side of
the treadmill with the Right Inside Upright
Cover (95) and the Right Outside Upright
Cover (96).
2
2