Owner's Manual

4. Slide the remaining Brace (2) onto the bracket on the
other Upright (1). Attach the Brace to the Upright with
two M10 x 65mm Bolts (26), four M10 Washers (3),
and two M10 Nylon Locknuts (7). Do not tighten the
Nylon Locknuts yet.
Attach the Upright (1) to the Right Base (4) with two
Lower Support Plates (15), four M10 x 70mm Bolts
(29), and four M10 Nylon Locknuts (7). Do not tight-
en the Nylon Locknuts yet.
Attach the Brace (2) to the Right Base (4) with two
M10 x 70mm Bolts (29) and two M10 Nylon Locknuts
(7). Do not tighten the Nylon Locknuts yet.
4
7
3. Slide a Brace (2) onto the bracket on one of the
Uprights (1). Attach the Brace to the Upright with two
M10 x 65mm Bolts (26), four M10 Washers (3), and
two M10 Nylon Locknuts (7). Do not tighten the
Nylon Locknuts yet.
Attach the Upright (1) to the Left Base (8) with two
Lower Support Plates (15), four M10 x 70mm Bolts
(29), and four M10 Nylon Locknuts (7). Do not tight-
en the Nylon Locknuts yet.
Attach the Brace (2) to the Left Base (8) with two
M10 x 70mm Bolts (29) and two M10 Nylon Locknuts
(7). Do not tighten the Nylon Locknuts yet.
Note: The Lower Support Plates (15) has a wider
edge than the Upper Support Plate (37).
3
1
3
7
3
Bracket
Wide
Edge
29
29
7
7
26
2
8
7
29
1
26
7
29
29
2
15
15
3
7
4
7
15
15
Bracket