Manual

ASSEMBLY
Assembly requires two persons. Hace all parts of the exercise cycle in a cbared area and remove the packing
materiab, Do not dispose of the packing materiab until assembly is compbted,
Assembly requires the incJuded tools and your own adjustable wrench ©___/_ and phillips
screwdriver _,_ _.
Use the drawings below to identify the small parts used in assembly, The number in parenthesis below each
drawing refers to the key number of the part, from the PART LiST on page 22, The second number refers to the
quantity needed for assembly, Note: Some small parts may have been pre-attaehed for shipping, mfa part is
not in the parts bag, check to see if it has been pre-assembled.
M8 x 40mm Button Screw
(54)-12
M8 x 25mm Patch Screw
(59)-4
M4 x 16mm Screw
(57)-5
f-f _\ i_./
\, \ _;
M8 Split Washer
(55)-18
M8 Nylon
Locknut (63)-4
1, identify the Front Stabilizer (15), While another person
lifts the front of the Frame (1), attach the Front
Stabilizer to the Frame with four M8 x 40mm Button
Screws (54) and four M8 Split Washers (55),
\
4