Owner's Manual

12
36
61
96
102
Hexagonal
Holes
14. Insert the Right Upper Body Arm (61) into the
Right Upper Body Leg (36).
Attach the Right Upper Body Arm (61) with two
M8 x 35mm Bolts (96) and two M8 Locknuts
(102). Make sure that the Locknuts are in the
hexagonal holes.
Repeat this step on the other side of the
elliptical.
See step 13. Tighten the M8 x 16mm Screws
(120).
67
68
36
123
123
15. Attach the Right Inner Cover (68) to the Right
Upper Body Arm (61) with a #8 x 3/4" Screw
(123).
Identify the Right Outer Cover (67), which is
marked with a “Right” sticker, and orient it as
shown.
Attach the Right Outer Cover (67) to the Right
Inner Cover (68) and the Right Upper Body Leg
(36) with two #8 x 3/4" Screws (123).
Repeat this step on the other side of the
elliptical.
61
14
15