Owner's Manual

8. Identify the Left and Right Inner Covers (55, 68),

which are marked with “Left” and “Right” stick-

ers, and orient them as shown.

Slide the Left Inner Cover (55) onto the left side

of the Upright (4). Then, slide the Right Inner

Cover (68) onto the right side of the Upright.

9. Using a small plastic bag to keep your fingers

clean, apply some of the included grease to the

Pivot Axle (35) and to two Wave Washers (95)

(only one is shown).

Insert the Pivot Axle (35) through the Upright (4)

and then center it. Tip: It may be helpful to use

a rubber mallet.

Identify the Right Upper Body Arm (61), which

is marked with a “Right” sticker, and orient it as

shown.

Slide a Wave Washer (95) and the Right Upper

Body Arm (61) onto the right side of the Pivot

Axle (35).

Repeat these actions for the Left Upper Body

Arm (not shown).

Grease