Owner's Manual

13
HOW TO USE THE ELLIPTICAL
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical has been exposed to
c
old temperatures, allow it to warm to room tem-
perature before plugging in the power adapter. If
y
ou do not do this, you may damage the console
displays or other electronic components.
Plug the power adapter into the jack on the back of
the console. Then, plug the power adapter into an
appropriate outlet that is properly installed in accor-
dance with all local codes and ordinances.
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical
e
xerciser, moving it requires two persons. Stand in
front of the elliptical, hold the upright, and place one
f
oot against one of the front wheels. Pull on the
upright and have a second person lift the handle on
the ramp until the elliptical will roll on the front wheels.
Carefully move the elliptical to the desired location,
and then lower it to the floor.
Place
your foot
here
Pull on
upright
Lift here
Power
Adapter