Owner's Manual

18
HOW TO USE THE IFIT TRAINING MODE
The optional iFit Live module allows your console to
c
ommunicate with your wireless network and unlocks
exciting new features. For example, you can download
p
ersonalized workouts and track and analyze your
workout results on the iFit Live website. To purchase
an iFit Live module at any time, go to www.iFit.com
or call the telephone number on the front cover of
this manual.
To select the iFit training mode, press the Menu button
and then press the Increase and Decrease buttons
next to the Enter button and highlight IFIT TRAINING.
Then, press the Enter button. For more information
about the iFit training mode, go to www.iFit.com.
Note: To use an iFit Live module, you must have
access to a computer with an internet connection and
a USB port. You must also have your own wireless
network including an 802.11b router with SSID broad-
cast enabled (hidden networks are not supported).
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug the included
audio cable into the jack on the side of the console
and into a jack on your MP3 player or CD player;
make sure that the audio cable is fully plugged in.
Next, press the play button on your MP3 player or CD
player. Adjust the volume level using the volume con-
trol on your MP3 player or CD player or press the
Volume Increase and Decrease buttons on the con-
sole.
HOW TO USE THE INFORMATION MODE
The console features an information mode that allows
y
ou to view usage information and to adjust the con-
trast level of the displays.
To select the information mode, press and hold down
the Display button for a few seconds until the informa-
tion mode appears in the display.
The display will show the total number (in thousands)
of strides that have been pedaled on the elliptical. The
display will also show the total number of hours that
the elliptical has been used.
The currently selected contrast level will also appear
in the display. Press the Increase and Decrease but-
tons next to the Enter button repeatedly to select the
desired contrast level.
Press the Display button to save the contrast level set-
ting.
The display may also indicate when an accessory is
connected to the console. If the iFit Live module is
connected, the display will show the words WIFI STA-
TUS. If a USB device is connected, the display will
show the words USB STATUS. If no accessory is con-
nected, the display will show the words NO MODULE
DETECTED.
Press the Display button to exit the information mode.