Owner's Manual

6
1.
With the help of another person, place two
packing inserts from the packing material under
t
he rear of the Frame (1) so that the Frame is
lifted off the floor. Have another person hold
the elliptical exerciser to prevent it from
moving from side to side until this step is
completed.
Attach the Rear Stabilizer (3) to the Frame (1)
with four 5/16" x 2 1/2" Button Screws (88).
Then, remove the packing inserts and lower the
Rear Stabilizer.
1
2. With the help of another person, place two pack-
ing inserts from the packing material under the
Frame (1) so that the Frame is lifted off the
floor. Have another person hold the elliptical
exerciser to prevent it from moving from
side to side until this step is completed.
Attach the Front Stabilizer (2) to the Frame (1)
with four 5/16" x 2 1/2" Button Screws (88).
Then, remove the packing inserts and lower the
Front Stabilizer.
2
88
88
2
1
88
88
3
1
To make assembly easier, read the
information on page 5 before you begin
a
ssembling the elliptical exerciser.