Owner's Manual

7. Orient the Seat (22) and the Seat Carriage (3)

as shown.

See the inset drawing. Attach the Seat (22) to

the Seat Carriage (3) with two M8 Hex Nuts

(

66). Make sure that the nose of the Seat is

pointing straight ahead before you tighten

the Hex Nuts.

Locate the Adjustment Knob (23) on the Seat

Post (2). Loosen the Adjustment Knob and pull

it outward. Then, insert the Seat Carriage (3)

into the Seat Post.

Slide the Seat Carriage (3) to the desired posi-

tion and then release the Adjustment Knob (23)

into one of the adjustment holes in the Seat

Carriage. Make sure that the Adjustment

Knob is firmly engaged in an adjustment

hole in the Seat Carriage.

8. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly

is completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.