Manual

Tightentwo3"Bolts(98)withtwoWashers(97)intothe
bottomoftheUprightBase(96)andtheHandrails(67)
(onlyoneHandrailisshown),FirmlytightentheBolts,
Withthehelpofa secondperson,carefullytiptheUpright
Base(96)soitisfiatonthefloor,Removethecardboard
fromunderneaththeUprightBase,
97
97
96
8, Fold the incline trainer to the storage position (see HOW
TO FOLD THE iNCLiNE TRAINER FOR STORAGE on
page 28),
Slide the Right Wheel Bracket (59) into the slot in the
Right Rear Endcap (57), Align the hobs in the Bracket
with the hobs in the Frame (43), Attach the Bracket to the
Frame with two 1" Bolts (55),
Attach the Left Wheel Bracket (not shown) in the same
way,
55
43
9, Make sure that aH parts are properly tightened before you use the incline trainer. Keep the included
allen wrench in a secure place, The allen wrench is used to adjust the walking belt (see page 31), To protect
the floor or carpet from damage, place a mat under the incline trainer.