Owner's Manual

9
5. Raise the Frame (55) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (76) so that the large
b
arrel and the Latch Knob (50) are in the posi-
tions shown.
Remove the tie from the upper end of the
Storage Latch (76). Attach the upper end of the
Storage Latch to the bracket on the Frame (55)
with a 3/8" x 1 3/4" Bolt (109) and a 3/8" Nut
(20).
Attach the lower end of the Storage Latch (76)
to the bracket on the Upright (85) with a 3/8" x 1
3/4" Bolt (109) and a 3/8" Nut (20). Note: It may
be necessary to move the Frame (55) back and
forth to align the Storage Latch with the bracket
on the Upright.
Lower the Frame (55) (see HOW TO LOWER
THE TREADMILL FOR USE on page 28).
76
20
20
Large
Barrel
85
109
55
5
109
50
6. Identify the Left Base Cover (88), which has
cutouts in the locations shown. Slide the Left
Base Cover onto the left Upright (85). Then, slide
the Right Base Cover (86) onto the right Upright.
Identify the Left Upright Sleeve (77) and the
Right Upright Sleeve (9). Slide the Upright
Sleeves onto the Uprights (85) as shown.
88
77
86
9
85
Cutouts
6
85