Model No. NTL10841 Serial No. USER'S MANUAL Find the serial number in the location shown below. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID DELAYS, PLEASE CALL DIRECT TO OUR TOLLFREE CUSTOMER HOT LINE. The trained technicians on our Customer Hot Line will provide immediate assistance, free of charge to you.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ................................................................. BEFORE YOU BEGIN ....................................................................... ASSEMBLY ............................................................................... OPERATION AND ADJUSTMENT ............................................................. HOW TO FOLD AND MOVE THE TREADMILL .................................................. TROUBLESHOOTING .......................................
IMPORTANT PRECAUTIONS t'_ WARN ING: following To reduce the risk of burns, fire, electric important precautions and information before operating the treadmill. 12. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed or stop unexpectedly, which may result in a fall and serious injury. 1.
22. When using iFIT.com CDs and videos, an electronic "chirping" sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the "chirp" and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before the personal trainer describes the change. 26. Never insert or drop any object into any opening. 27. 23. When using iFIT.
BEFORE YOU BEGIN Thank you for selecting the revolutionary NordicTrack ® C2000 treadmill. The C2000 treadmill combines ad- at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is NTL10841.
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench I_' f} and your own phillips screwdriver and wire cutters __. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
, Cut the rubber band holding the Upright Wire Harness (98). Have a second person hold the console assembly near the Uprights (69). Connect the Upright Wire Harness to the wires extending from the Console Base (81). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. Insert the connectors and the Upright Wire Harness into the right Upright, and then set the console assembly on the Uprights. Be careful not to pinch the wires.
If you purchase the optional chest pulse sensor (see page 22), follow the steps below to install the receiver and the short jumper wire included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated screws from the Console Back (88). (Important: The screws may be different lengths; make sure to remember the original location of each screw.) Next, remove the Console Back. 88 Screws 2. Peel the paper off the pad on the bottom of the receiver (A).
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCl-equipped outlets. Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant.
/ WARM-UP / COOL-DOWN FAT-BURN ENDURANCE TRAiNiNG PERFORMANCE ZONES Pulse Sensor Pulse Sensor START STOP IA VO O 'J O Note: If there is a sheet of clear plastic on the console, remove it. FEATURES OF THE CONSOLE stereo, portable stereo, computer, or VCR and play special iFIT.com CD and video programs (iFIT.com CDs and videocassettes are available separately). iFIT.
_ Insert the key fully into the console. See HOW TO TURN ON THE POWER at the left. B Select the manual mode. When the key is inserted, the manual mode will be selected. If a program has been selected, reselect the manual mode by pressing the Select Program button repeatedly until the track appears in the program display but the indicator above the iFIT.com button is not lit. Start the walking belt.
E! segment of the program, and your current pace. The display will change from one number to the next every few seconds, as shown by the indicators below the display. Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline buttons.
moving your hands. When your pulse is detected, the Pulse indicator will light, one or two dashes (- -) will appear in the Calories/Pulse display, and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. B n Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11. Turn on the fans if desired. F,I Select one of the four preset programs. To turn on the fans at low speed, press the Fans button.
When only three seconds remain in the first segment of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound. In addition, if the speed and/or incline of the treadmill is about to change, the Speed display and/or the Incline/Distance display will flash to alert you. When the first segment is completed, all speed settings will move one column to the left.
n setting and an incline setting for the first segment, simply adjust the speed and incline of the treadmill as desired by pressing the Speed and Incline buttons. Every few times a Speed button is pressed, an additional indicator will light or darken in the Current Segment column. Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11.
n column and the column to the right will flash, a series of tones will sound, the Speed display and the Incline/Distance display will flash, and all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column and the treadmill will automatically adjust to the second speed and incline settings that you programmed previously. Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11.
HOW TO CONNECT YOUR PORTABLE STEREO To use iFIT.com CDs, the treadmill must be connected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 17 and 18 for connecting instructions. To use iFIT.com videocassettes, the treadmill must be connected to your VCR. See page 19 for connecting instructions. To use iFIT.com programs directly from our Web site, the treadmill must be connected to your home computer. See page 18 for connecting instructions.
HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. Note: If your computer has a 3.5mm LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter.
HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 18. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter.
If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next "chirp" is heard, the speed and/or incline will change to the next settings of the CD or video program. • Make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.
B When the on-screen countdown ends, the program will begin and the walking belt will begin to move. Hold the handrails, step onto the walking belt, and begin walking. During the program, an electronic "chirping" sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the "chirp" and be prepared for speed and/or incline changes. Our Web site at www.iFIT.
THE INFORMATION MODE/DEMO MODE HOW TO USE THE AROMATHERAPY The console features an information mode that keeps track of the total number of miles that the walking belt has moved and the total number of hours that the To make your workouts more enjoyable, the console features treadmill has been operated. The information mode also allows you to switch the console from miles to kilometers. In addition, the information mode allows you to turn on and turn off the demo mode.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the pin on the latch knob. Frame 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department tollfree at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a.
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9. b, If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn.
CONDITIONING GUIDELINES uses easily accessible carbohydrate calories for energy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. For maximum fat burning, adjust the speed and incline of the treadmill until your heart rate is near the middle number in your training zone.
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch--never 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 1 2. Hamstring Stretch Sit with one leg extended.
NOTES 29
PART LISTmModel No. NTL10841 R1103A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. 1 2 3 2 2 4 4 5 6 7 8 9 10 11 12 13 14 15" 16 17 18 19 2O 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 2 2 1 1 4 1 4 1 1 1 1 1 1 1 1 5 1 1 1 1 1 1 12 1 1 1 1 1 1 6 1 1 1 1 1 2 1 1 1 4 6 2 6 1 4 4 Description Key No. Qty.
Key No. Qty. Description 102 103 104 105 106" 107 108 109 110 111 112 2 2 2 1 1 2 1 1 1 1 2 Extension Leg Extension Cap Incline Warning Decal Right Foam Trim Extension Leg Assembly Fan Book Holder Power Cord Grommet Frame Left Rear Foam Trim Roller Star Washer 113 114 2 1 Spring Plate Left Front Foam Trim 115 116 117 1 1 1 Left Cup Holder Right Cup Holder Right Fan Housing ORDERING REPLACEMENT Key No. Qty.
m X "U 0 22 75 m 32 20 Z Q 36 r_31 2 42 1 38 I o _D 111 52 Z 0 60 61 14 \'83 45 54 &-- Z 100 85 100 _ 5O 34.
m X 0 79 84 m 87 108 83 Z 69 70 I 71 90 8'3 ¢D 95 94 83 \ 9O Z 0 \ \ \ \ \ 20 102 ? 47 27 104 53 102 1°61 99 V53 _47 I \ 95 Z -t
LIMITED WARRANTY WHAT tS COVERED--The entire NordicTrack _ C2000 treadmill ("Product") is warranted to be free of all defects in ma- terial and workmanship. WHO IS COVERED--The HOW LONG original purchaser IS tT COVERED--ICON or any person Health & Fitness, receiving the Product Inc. ("ICON"), warrants as a gift from the original the motor for three purchaser. years after the date of purchase. The belt and deck are covered for two years after the date of purchase.