Owner's Manual

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the

owest position. If you do not do this, you may perma-

nently damage the treadmill. Remove the key and unplug

the power cord. CAUTION: You must be able to safely lift

45 lbs. (20 kg) to raise, lower, or move the treadmill.

1. Hold the walking platform with your hands in the location

shown by the arrow at the right. CAUTION: To decrease

the possibility of injury, bend your legs and keep your

back straight. As you raise the walking platform, make

sure to lift with your legs rather than your back. Raise

the walking platform about halfway to the vertical position.

2. Move your right hand to the position shown and hold the

treadmill firmly. Pull the latch knob to the left and hold it.

Raise the walking platform until the plate passes the pin

on the latch knob. Release the latch knob. Make sure

that the plate is resting against the pin as shown.

To protect the floor or carpet from damage, place a

mat under the treadmill. Keep the treadmill out of

direct sunlight. Do not leave the treadmill in the stor-

age position in temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the

storage position as described above. Make sure that the

plate is resting against the pin.

1. Hold the uprights and place one foot against a wheel.

2. Pull the uprights back until the treadmill rolls freely on the

wheels. Carefully move the treadmill to the desired loca-

tion. Never move the treadmill without tipping it back.

To reduce the risk of injury, use extreme caution

while moving the treadmill. Do not attempt to move

the treadmill over an uneven surface.

3. Place one foot against a wheel, and carefully lower the

treadmill until it is resting in the storage position.

Latch

Knob

Plate

Wheel

Uprights