Owner's Manual

9
7. Slide the Right Upright Sleeve (96) up against
the console assembly. Attach the Right Upright
Sleeve with two 3/4" Screws (4).
Attach the Left Upright Sleeve (not shown) to
the Left Upright (73) as described above.
73
74
4
96
4
7
6. Finger tighten three Handrail Bolts (64) with
three Upright Star Washers (90) into the Right
U
pright (74). Next, finger tighten three Handrail
Bolts with three Upright Star Washers (not
s
hown) into the Left Upright (73). Then, firmly
tighten the six Handrail Bolts.
73
74
64
64
90
90
6
9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key
in a secure place; the hex key is used to adjust the walking belt (see pages 26 and 27). To protect the floor
or carpet from damage, place a mat under the treadmill.
8. With the help of a second person, raise the front
of the treadmill and insert the crossbar on the
Base (83) into the cutout in the cardboard stand
as shown. Have the second person hold the
treadmill to prevent it from moving forward
or backward.
Firmly tighten the four Upright Bolts (72).
With the help of a second person, lower the
treadmill off the cardboard stand.
Cardboard
Stand
72
83
72
8