Owner's Manual

8
3. With the help of a second person, carefully tip
the incline trainer down so that the Base (80) is
flat on the floor.
Attach a Wheel (12) to each side of the Base
(
80) with a 3/8" x 2 1/2" Bolt (6) and a 3/8" Nut
(7) (only one side is shown).
3
6
7
12
80
5. Posistion the Console Crossbar (103) between
the Uprights (77, 79) as shown. Attach the
Console Crossbar to the Uprights with four 5/16"
x 2 3/4" Bolts (4) and four 5/16" Star Washers
(9). Do not fully tighten the Bolts yet.
Remove the tie from the Upright Wire (78).
5
103
4
9
77
79
78
Tie
4
9
4
89
87
104
4. Set the Console Cover (87) face down on a soft
surface. Remove the two #8 x 1 1/2" Screws
(104) from the Console Back (89). Save the
Screws for step 6. Separate the Console Back
from the Console Cover and remove the
Console Crossbar (not shown) from inside.