Owner's Manual

9
6. Set the Console Cover (87) on the Uprights (77,
79). Make sure that the Console Cover is ori-
ented with the wire ties toward the bottom as
s
hown.
A
ttach the Console Cover (87) with the two #8 x
1 1/2" Screws (19) that you removed in step 4.
Start both Screws, and then tighten them. Do
not overtighten the Screws.
Insert the Upright Wire (78) through the loops in
the ties.
6
Ties
8
7
79
19
78
77
7. Identify the Left and Right Pulse Handrails (86,
102).
Hold the Left Pulse Handrail (86) near a
Handrail (88). Insert the Left Pulse Wire (90)
into the top of the Handrail and out of the hole.
Insert the Left Pulse Handrail into the Handrail.
Be careful not to pinch the Left Pulse Wire.
Attach the Left Pulse Handrail (86) to the
Handrail (88) with two 5/16" x 1 3/8" Bolts (3)
and two 5/16" Star Washers (9). Note: See the
inset drawing. Use the two indicated bolt
holes.
Attach the Right Pulse Handrail (102) to the
other Handrail (88) as described above.
9
3
3
90
Hole
88
91
9
86
102
Hole
88
7
86
90
88
Bolt
Holes