Manual

PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a single-outlet surge suppressorthat meets all of the specificationsdescribed on page 8.
b.
Ifthe walking belt isovertightened,treadmill perfor-
mance may decrease and the walking belt may be-
come damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear roller adjustment bolts counterclockwise, 1/4 of a
turn. When the walking belt is properly tightened, you
should be able to lift each side of the walking belt 3 to
4 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in-
sert the key, and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.
b
Rear RollerAdjustment Bolts
c. If the walking bert still slows when walked on, please call our Customer Service Department, toll-
free.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt is off-center,remove the key and UN-
PLUG THE POWER CORD. If the walking belt has
shifted to the left, use the allenwrench to turnthe left
rear rollerboltclockwise1/2 of a turn; if the walking belt
has shifted to the right, turnthe leftrear miler boltcoun-
terclockwise1/2 of a turn. Be careful notto overtightenthe
walking belt. Plugin thepower cord,insert the key,and
runthetreadmillfor a few minutes. Repeat untilthewalk-
ing belt iscentered.
b. If the walking belt slips when walked on, first remove the
key and UNPLUG THE POWER CORD. Using the allen
wrench, turn both rear roller bolts clockwise, 1/4 of a turn,
When the walking belt is correctly tightened, you should
be able to lift each side of the walking belt 3 to 4 inches off
the walking platform. Be careful to keep the walking belt
centered. Plug in the power cord, insert the key, and care-
fully walk on the treadmill for a few minutes. Repeat until
the walking belt is propedy tightened.
PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com
CD's and videos are played
SOLUTION: a. With the key in theconsole, press one ofthe Incline buttons. While the incline is changing, re-
move the key. After a few seconds, re-insertthe key. The treadmillwill automaticallyrisetothe
maximum inclineleveland then retum to the minimumlevel. Thiswill recalibrate the incline.
28