Owner's Manual
27
HOW TO USE THE WIRELESS & NETWORK
SETTINGS MODE
The console features a wireless and network settings
mode that allows you to set up a wireless network
connection.
1. Select the settings main menu.
See step 1 on page 25.
2. Select the wireless & network settings mode.
In the settings main menu, touch the Wireless
Network button to enter the wireless & network
settings mode.
3. Enable Wi-Fi.
Make sure that the Wi-Fi checkbox near the upper
right corner of the screen is marked with a green
checkmark. If it is not, touch the Wi-Fi menu option
once and wait for a few seconds. The console will
search for available wireless networks.
4. Set up and manage a wireless network
connection.
Touch the Wi-Fi settings menu option. The screen
will show a list of available networks. Note: It may
take several seconds for the list of wireless net-
works to appear.
If you haven’t done so already, enable Wi-Fi by
checking the checkbox near the upper right corner
of the screen (see step 3).
Make sure that the checkbox on the Network
notication menu option is marked with a green
checkmark to have the console notify you when a
wireless network is within range and available.
Note: You must have your own wireless network
and an 802.11b/n router with SSID broadcast
enabled (hidden networks are not supported).
When a list of networks appears, touch the desired
network. Note: You will need to know your network
name (SSID). If your network has a password, you
will also need to know the password.
An information box will ask if you want to connect
to the wireless network. Touch the Connect button
to connect to the network or touch the Cancel but-
ton to return to the list of networks. If the network
has a password, touch the password entry box. A
keyboard will appear on the screen. To view the
password as you type it, touch the Show Password
checkbox.
To use the keyboard, see HOW TO USE THE
TOUCH SCREEN on page 16.
When the console is connected to your wireless
network, the WiFi box at the top of the screen will
display the word CONNECTED. Then, press the
back button on the console to return to the wireless
& network settings mode.
To disconnect from a wireless network, select the
wireless network and then touch the Forget button.
If you are having problems connecting to an
encrypted network, make sure that your password
is correct. Note: Passwords are case-sensitive.
Note: The iFit Live mode supports unsecured and
secured (WEP, WPA, and WPA2) encryption. A
broadband connection is recommended; perfor-
mance depends on connection speed.
Note: If you have questions after following
these instructions, go to www.iFit.com/support
for assistance.
5. Exit the wireless & network settings mode.
To exit the wireless & network settings mode, press
the back button on the console.