Owner's Manual

8
3. With the help of a second person, carefully tip
the incline trainer down so that the Base (80) is
flat on the floor.
Attach a Wheel (12) to each side of the Base
(
80) with a 3/8" x 2 1/2" Bolt (6) and a 3/8" Nut
(7) (only one side is shown).
3
6
7
12
80
4
89
87
104
4. Set the Console Cover (87) face down on a soft
surface. Remove the two #8 x 1 1/2" Screws
(104) from the Console Back (89). Save the
Screws for step 6. Separate the Console Back
from the Console Cover, and remove the
Console Crossbar (not shown) from inside.