Owner's Manual

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materialsuntilyounishallassemblysteps.

• After shipping, there may be an oily substance on

the exterior of the treadmill. This is normal. If there

is an oily substance on the treadmill, wipe it off

with a soft cloth and a mild, non-abrasive cleaner.

• To identify small parts, see page 6.

• Assembly requires the following tools:

the included hex key

one adjustable wrench

one Phillips screwdriver

To avoid damaging parts, do not use power tools.

ASSEMBLY

1. Make sure that the power cord is unplugged.

Identify the Right Upright (90), which is marked

“Right.” Have a second person hold the Right

Upright near the Frame (56).

See the inset drawing. Tie the wire tie in the

Right Upright (90) securely around the end of the

Upright Wire (84). Then, pull the other end of the

wire tie until the Upright Wire is routed through

the Right Upright.

Wire

Tie

Wire

Tie