User Manual

HOW TO USE THE MAINTENANCE SECTION

1. Select the settings main menu.

See step 1 on page 24.

2. Select the maintenance section.

In the settings main menu, scroll to the

Maintenance section.

3. Update the console firmware.

For the best results, regularly check for

firmware updates.

Touch the Update button to check for firmware

updates using your wireless network. The update

will begin automatically.

To avoid damaging the incline trainer, do not

turn off the power or remove the key while the

firmware is being updated.

The screen will show the progress of the update.

When the update is complete, the incline trainer will

turn off and then turn back on. If it does not, press

the power switch into the off position, wait for sev-

eral seconds, and then press the power switch into

the reset position. Note: It may take a few minutes

for the console to be ready for use.

Note: Occasionally, a firmware update may cause

the console to function slightly differently. These

updates are always designed to improve your exer-

cise experience.

4. Calibrate the incline system of the incline

trainer.

Touch the Calibrate Incline button. Then, touch the

Begin button to calibrate the incline system. The

incline trainer will automatically rise to the maxi-

mum incline level, lower to the minimum incline

level, and then return to the starting position. This

will calibrate the incline system. Touch the Cancel

button to return to the maintenance section. When

the incline system is calibrated, touch the Finish

button.

IMPORTANT: Keep pets, feet, and other objects

away from the incline trainer while the incline

system is calibrating. In an emergency, pull

the key from the console to stop the incline

calibration.

5. Exit the maintenance section.

To exit the maintenance section, touch the back

button on the screen.