Owner's Manual

10
9. IMPORTANT: To avoid damaging the
Crossbar (93), do not use power tools and
do not overtighten the #10 x 3/4" Screws (9).
Orient the Crossbar (93) as shown. Tighten all
four #10 x 3/4" Screws (9) about halfway into
the Handrails (87, 88). Slide the Crossbar as far
forward as possible and tighten the four Screws.
93
88
9
9
9
87
8. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove the four Screws (A). Next, lift off
t
he Crossbar (93) and the Console Frame (104).
Discard the four Screws.
93
Console
Assembly
A
8
A
A
104