Owner's Manual

5. Identify the Left Base Cover (82) and the Right

Base Cover (83). Slide the Left Base Cover onto

the Left Upright (89). Slide the Right Base Cover

onto the Right Upright (90). Do not press the

Base Covers into place yet.

Remove the wire tie from the Upright Wire (81).

4. Hold the Left Upright (89) against the Base

(94). Be careful not to pinch any wires. Insert

two 3/8" x 2 3/4" Patch Bolts (7) and two 3/8" x

1/4" Patch Bolts (8) with two 3/8" Star

Washers (13) into the Left Upright.

Partially tighten the 3/8" x 2 3/4" Patch Bolts (7)

and the 3/8" x 1 1/4" Patch Bolts (8) until the

heads of the Patch Bolts touch the Left Upright

(89); do not fully tighten the Patch Bolts yet.

Attach the Right Upright (not shown) in the

same way. Note: There are no wires on the

right side.

Wire

Tie