Owner's Manual

14
HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into the included adapter. Plug
the adapter into the LINE OUT jack on your
stereo.
B. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into the included adapter. Plug
the adapter into an RCA Y-adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of
the Y-adapter. Plug the Y-adapter into the LINE
OUT jack on your stereo.
HOW TO CONNECT YOUR COMPUTER
Note: If your computer has a 3.5mm LINE OUT
jack, see instruction A. If your computer has only
a PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into the LINE OUT jack on your
computer.
B. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into a 3.5mm Y-adapter (available
at electronics stores). Plug the Y-adapter into the
PHONES jack on your computer. Plug your head-
phones or speakers into the other side of the Y-
adapter.
CD
VCR
Amp
LINE OUT
LINE OUT
Audio
Cable
Adapter
A
CD
VCR
Amp
LINE OUT
Audio
Cable
RCA
Y-adapter
Wire removed from
LINE OUT jack
B
Adapter
LINE OUT
Audio
Cable
A
PHONES
Audio
Cable
B
3.5mm
Y-adapter
Headphones/Speakers