Owner's Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the stepper in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed. In addition to the included

allen wrenches, assembly requires an adjustable wrench and a rubber mallet .

As you assemble the stepper, use the drawings below to identify the small parts used in assembly. The number

in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 18. The

second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assem-

bled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M10 x 91mm Bolt (63)–2

M10 x 82mm Bolt (26)–4

M10 Split

Washer (30)–10

M10 Nylon

Locknut (27)–4

M8 Nylon

Locknut (28)–4

M8 x 35mm

Button Bolt (24)–4

Console

Screw (57)–4

M8 Split

Washer (54)–4

M10 x 48mm Button

Screw (99)–4