Owner's Manual

6
2. Slide the upper end of a Handrail (101) onto the right
Upright (70) as shown. Note: It will be necessary to
pivot the Handrail to the side and back repeatedly (see
arrow A) while pushing on the Handrail (see arrow B)
to slide it fully onto the Upright. Next, pivot the lower
end of the Handrail down, push it toward the right
Upright, and then align it with the indicated hole.
Tighten two Handrail Screws (103) into the upper end of
the Handrail (101) and the right Upright (70).
Attach the other Handrail (101) to the left Upright (70) as
described above.
1. With the help of a second person, carefully raise the
Uprights (70) until the Wheels (30) are resting flat on the
floor.
2
A
3
1
70
30
101
103
103
70
70
101
95
95
102
102
70
101
3. With the help of a second person, carefully tip the Uprights
(70) down as shown.
Tighten a Handrail Bolt (95) with a Handrail Washer (102)
into the right Upright (70) and the lower end of the right
Handrail (101) as shown.
Next, tighten a Handrail Bolt (95) with a Handrail Washer
(102) into the left Upright (70) and the lower end of the left
Handrail (101) (not shown).
With the help of a second person, carefully tip the Uprights
(70) back to the upright position.
Hole
Assembly
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Assembly
requires the included allen wrench and your own phillips screwdriver and adjustable
wrench .
B