Operation Manual

Door reversibility

1. Unplug the appliance from the power supply

before carrying out the below-mentioned

operations.

2. Remove the ventilation grill (D).

3. Remove the bottom hinge (E).

4. Remove the door by releasing it from the top

hinge pin.

5. Remove the pin (G) from the top hinge, then

mount these on the opposite side, after having

removed the plugs which must be refitted on the

other side.

6. Refit the door.

7. Screw down the bottom hinge (E) on the opposite

side.

8. Remove the plug (F) from the ventilation grill (D)

and replace it on the opposite side.

9. Re-assemble the ventilation grill (D).

10.Unscrew the handle. Refit it on the opposite side

after having pierced the plugs with a punch.

Cover the holes left open with the plugs

contained in the documentation pack

Warning:

After having reversed the opening direction of

the doors check that all the screws are properly

tightened and that the magnetic seal adheres to

the cabinet. If the ambient temperature is cold (i.e.

in Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the

gasket or accelerate this process by heating up the

part involved with a normal hairdrier.

PR220