60cm INDUCTION HOB INSTALLATION AND OPERATING INSTRUCTIONS HCI60FL
CONTENTS: Safety instructions.............................................................................................3 Description of the appliance.............................................................................5 Cooking surface and control panel of 4 heater....................................................5 Operation of the appliance................................................................................9 Switching the appliance on and off........................................
SAFETY INSTRUCTIONS We have included this section for your safety. Please read this information carefully before using your hob. WARNING: · It is hazardous for anyone other than authorised service personal, to carry out servicing or repairs which involve the removal of covers. · To avoid the risk of an electric shock, do not attempt repairs yourself. · In the event of any damage that occurs as a result of improper connection or installation, the warranty will not be valid.
SAFETY INSTRUCTIONS Human safety: · During operation the hob surface can get hot, small children must be kept away from the appliance. · Users with implanted pacemakers should keep their upper body at least 30cm from induction cooking zones that are switched on.
DESCRIPTION OF THE APPLIANCE Dear Customer, Please read the instructions in this user guide before using the hob and keep it for future reference.
Control Panel for 4 heater : Upper left heater selection/increase heat setting Timer Display Upper right heater selection/increase heat setting Lower left heater Lower right heater selection/increase selection/increase heat setting heat setting Timer setting/ Decrease increase timer heat setting/ (optional) decrease timer (optional) 6 On/Off
OPERATION OF THE APPLIANCE Use the induction cooking zones with suitable cookware. After mains voltage is applied, all displays are come on for a moment. When this time is over, the hob is in the stand-by mode and it is ready for operation. The hob is controlled with electronic sensors which are operated by touching the related sensors. Each sensor activation is followed by a sound signal (buzzer). Switching the appliance on: Switch the hob on by touching ON/OFF key .
Switching all cooking-zones off: To turn all the cooking zones off at once, touch the key. In the stand-by mode, an H appears on all cooking zones which are hot. Automatic heat-up function: All cooking zones are equipped with an automatic heat-up function. The automatic heat-up function sets the cooking zone to the highest setting for a certain period of time and then automatically switches back to the cooking setting that was originally set. Switch on the appliance and select a cooking zone.
Safety switch off function: Every cooking zone will be switched off after a defined maximum operation time if the heat setting is not modified. Every change in the cooking zone puts back the maximum operation time to the initial value of the operating time limitation. The maximum operation time depends on the selected temperature level. Heat setting 1-2 3-4 5 6-9 Safety switch off after 6 Hours 5 Hours 4 Hours 1,5 Hours Child Lock: After switching on the control, the child lock function can be activated.
Timer function (*optional): The timer function is realized in two versions: Minute minder timer (1..99 min): The minute minder timer can be operated if the cooking zones are switched off. The timer display shows 00 with a blinking dot. Touch the timer setting key to increase the time or touch to decrease the time. Adjustment range is between 0 and 99 minutes. If there is no operation in 10 seconds, the minute minder timer will be set and the blinking dot will disappear.
When the timer has run down, a signal sounds and the timer display shows 00 statically, the assigned cooking zone timer LED blinks. The programmed cooking zone will be switched off and the H will be displayed if the cooking zone is hot. The sound signal and the blinking of the timer LED will be stopped automatically after 2 minutes and/or by operating any key.
HINTS AND TIPS Cookware Use thick, flat, smooth bottomed cookwares that are the same diameter as the element. This will help reduce cooking times. · Cookware made of steel, enamelled steel, cast iron and stainless steel will give you the best results.In addition to this choose the vessels which are labelled by its producer as an Appropriate for induction cooking · You must ensure the comect size cookware is used on the correct cooking zone.
Examples of cooking applications The information given in the following table is for guidance only. Settings 0 1-3 4-5 6 -7 8 9 A Use for Element off Delicate warming Gentle simmering, slow warming Reheating and rapid simmering Boiling, saute and searing Maximum heat Automatic Heat-up Cleaning tips · Do not use abrasive pads, corrosive cleaners, aerosol cleaners or sharp objects to clean the surfaces of the hob. · To remove burnt food, soak it off with a damp cloth and washing-up liquid.
INSTALLATION OF THE APPLIANCE WARNING: The electrical connection of this hob should be carried out by a qualified electrician, according to the instructions in this guide and in compliance with the current regulations. In the event of any damage that occurs as a result of improper connection or installation, the warranty will not be valid. This appliance must be earthed. Installation safety · Any overhanging surface should be at least 65cm above the hob.
Min. B Min. A Min. 5 mm Neighboorhood walls Combustible Non-combustible A [mm] 60 40 B [mm] 150 40 · Apply the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it. · Screw the 4 worktop mounting brackets on the side walls of product.
· Secure the hob in place by putting it into cutout on the work surface.· Secure the hob in place by putting it into cutout on the work surface. · Before inserting the oven, it is necessary to remove the rear kitchen element panel in the area of the oven opening, in order to supply cooling. Equally, the front part of the kitchen base must have an opening of no less than 5 mm. Installing your hob above an oven Min. 5mm Min.
An approved suitable cable must be connected from the Consumer Unit (main fuse box) and be protected by its own 30amp fuse or Micro Circuit Breaker (MCB). The electrician must provide a double-pole switch, which disconnect both the line (live)and neutral conductors with a contact seperation of at least 3,0 mm. The switch should be fitted to the kitchen wall, aand must be placed in an easy accessible position in accordance with IEE regulations.
Electrical connection diagram PE N L 5 4 3 2 1 3x2,5mm2 230V~ 50Hz This appliance must be earthed. For this connection a power lead of wire type H05W-F should be used. For the induction hob, the cable must be H05VV-F 3X2,5 mm² / 60227 IEC 53. You will find the connection diagram shown on the bottom of your appliance.
Specifications Rated Voltage Rated Frequency Total Power 230 V 50 Hz 7.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
