Owner manual

Safety 2-9
2.6 Safety Interlock System
The Safety Interlock System is a built-in safety feature that automatically reduces dispensing system
servo power when the hatch is opened. This system mainly prevents personnel from being injured by
movement of the dispensing head and conveyor. This system consists of the following:
• A key attached to the dispensing system hatch that fits into a switch that is attached to the
right side doorframe.
• A light beacon.
• The system computer and Fluidmove software.
If the hatch is opened while a dispensing program is running, the key is extracted from the switch. The
break in the Interlock circuit causes the following actions:
• The Fluidmove software commands all dispensing motion to stop.
• The dispensing valve shuts off.
• The system goes into a low power level.
• The light beacon displays a solid yellow light.
To recover from a shutdown triggered by the Interlock:
1. Close the hatch.
 The dispensing program will resume at the same place it was when the hatch was opened.