Manual

12-2 Needle Heater
Table 12-1 Heating Element Compatibility Guide
Heating Element Valve Compatibility
HT-04 Asymtek DV-04 valve only
HT-06 All Asymtek valves except DV-04
HT-10N All Asymtek valves using metal needles
The Needle Heater and all Heating Elements should be
installed by a service technician. If the dispensing system
needs to be moved, the Needle Heater should be
disconnected. Refer all major adjustments to a service
technician and refer to the service manual for your
particular dispensing system for further assistance.
Major components of the Needle Heater are shown in Figure 12-1. The Temperature
Controller is shown in Figure 12-4.
Figure 12-1 HT-04
Heating Element
Thumbscrew
Power Cable
J-Type
Thermocouple
Cable