Manual

2-8 Introduction
Height Sensor
The Height Sensor is installed on the Dispenser next to the fluid pump or valve. It checks
and records the substrate height. Height Sensor operations are programmed using the
dispensing system software. The Height Sensor is an option on the C-702 and C-708 and is
standard on the C-708 AICE systems.
HT-2000 Temperature Controller
The HT-2000 is a precise temperature controller used to adjust the Vacuum Heated Tooling
Plate and Needle Heater temperatures. It controls temperature from ambient to 100°C. The
HT-2000 is an option on the C-702 and C-708 and is standard on the C-708 AICE systems.
Interior Light
This interior light provides a lighted work area inside the Century Series system.
Light Beacon
The Light Beacon is an operator warning device that can visually and audibly notify
operators and supervisors of the system status by displaying different colored lights and
issuing an audible warning tone. The Light Beacon is an option on all Century Series
systems.
Light Curtain
The Light Curtain takes the place of the Interlock Doors. Objects entering the dispensing
area are detected and system mechanics are paused. The Light Curtain works in conjunction
with the Safety Interlock System. The Light Curtain is an option on all Century Series
systems.
Needle Heater
The Needle Heater is a heating element attached to the needle that heats the liquid in the
needle to maintain consistent fluid flow. The Needle Heater is an option on the C-702 and
C-708 and is standard on the C-708 AICE systems.
Needle Sensor
The Needle Sensor records the needle XYZ position. The information is sent to the
dispensing system software. The Needle Sensor is an option on the C-702 and C-708 and is
standard on the C-708 AICE systems.
Computer System
The computer is used to program the dispensing system and to download a pre-programmed
set of instructions. The computer can be detached during production runs on C-702 and
C-708 systems with AV-700 Vision Systems. The computer system is an option on the
C-702 and C-708 and is standard on the C-708 AICE systems.