Manual

Operation 3-5
Figure 3-4 Century Series Control Panel with Dual Gauges
Switches
Table 3-1 Power Switches
Switch Function
This Power Switch, on the Control Panel, supplies power to
the major system components. The
position is ON. The
position is OFF.
0
The Main Power Switch (and Main Power Cord) supplies
power to the Power Manager, which in turn supplies power
to the entire system. It is located on the back panel of the
Century Series system (see Figure 2-5). The
position is
ON. The
position is OFF.
To cut power to the entire system, you must turn the Main Power
Switch OFF or unplug the Main Power Cord from either the machine
or the power source. You will find the Main Power Switch on the
back of the system.
Additional Fluid Pressure
Gauge for Second Valve
Additional Valve Pressure
Gauge for Second Valve