Manual

Safety 4-1
4
Safety
Your Century Series system has been designed to provide both safe and reliable dispensing
operations. This section includes an explanation of the safety features and necessary
precautions to ensure safe operation of the Century Series system.
Safety Precautions
Please review the following list of safety precautions for the operator and dispensing System
before operating your Century Series system.
Failure to comply with any of the above safety recommendations
could cause serious bodily harm to the user
.
Operator Safety Precautions
•
Locate and identify all safety warning labels on your system before initial use.
•
Always operate the system with the Safety Interlock
ON.
•
In case of a system malfunction, immediately push E-Stop (Emergency Stop). Do
not attempt to remove the workpiece while power is ON.
•
Do not wear loose clothing or jewelry while operating the system.
•
Tie back long hair to prevent it from getting caught in moving parts.
•
Always wear safety glasses when operating the system.
•
Do not touch the heater area.
•
Be sure to read and fully understand the Material Safety Data Sheet (MSDS) for the
fluid that you are dispensing.
•
Follow all MSDS recommendations for the proper disposal of syringes and fluids.
•
Only qualified personnel should perform maintenance and troubleshooting
procedures.
•
Disconnect all power cords before servicing the machine.
System Protection Precautions
•
Always wear a grounding strap when operating the machine.
•
Be careful when dispensing with caustic or conductive fluids. Immediately clean up
and contain all spills. If fluid gets into internal portions of the machine, call
Asymtek Technical Support immediately.
•
Maintain a clean and orderly work area.
•
Follow all suggested system maintenance.
•
Immediately remove parts that have fallen into the dispensing system.