User guide

Index-3
K
keyswitch. See interlock, safety
L
levelers, 2-6
lift table, 4-1
light beacon, 2-6, 3-9, 3-10, 4-15
loaders, upstream and downstream, 8-2
locking out power, 3-1, 3-12, 3-13
low air pressure sensor, 13-12
M
machine offsets procedures, 5-2–5-6
main air inlet, 2-10, 4-17, 4-20, 4-21, 6-3
maintenance
control panel, cleaning, 7-2
dispenser chassis, 7-1
miscellaneous, 7-2
part sensors, 7-1
pump/valve, 7-1
water trap, 7-2
manuals supplied, 1-2
OEM manuals, 1-2
use of, 1-3
Material Safety Data Sheet (MSDS), 1-1, 2-7, 3-1
motion system, 4-11, 8-1
motor references, 6-1
MSDS. See Material Safety Data Sheet
N
needle heater, 12-1
heating elements, 12-1
operation, 12-1
reinstalling, 12-4
setup, 12-4
specifications, 12-7
temperature controller, 4- and 8-channel, 12-4
troubleshooting, 12-7
valve compatibility, 12-1
needle sensor, 2-6, 6-3, 11-1
calculate master offsets, 5-3
find needle xyz, 11-2
operation, 11-2
setup, 11-2
tactile sensor, 11-1
troubleshooting, 11-5
valve offsets, 5-4
O
offsets. See Machine Offsets Procedures
optional components, 2-1, 8-2
options, special
dual-action dispensing head, 13-1–13-6
external I/O, 13-7.
fluid level sensor, magnetic, 13-14
hour meter, 13-11
low air pressure sensor, 13-12
P
part heaters. See heaters, part
part sensors, 7-1, 14-6
pattern recognition system. See vision system
pause button, 3-8, 4-10
pneumatic fittings
fluid, 4-18, 4-19
pneumatic fittings, valve, 4-18, 4-19
pot life, 13-15
power, main, 2-10, 3-12
circuit breaker, 2-10, 3-12, 4-9, 6-2
locking out, 3-1, 3-12
locking out, 3-13
power cable, 2-10, 6-2
power requirements, 8-2
start and stop buttons, 4-9
production shutdown, 5-7
production startup, 5-1–5-6
proportional-integral-derivative (PID) controller, 8-1
pumps, other types, 10-2
purge station, 2-7, 4-1, 7-4
purge boot selection, 7-6
replacing purge boot, 7-4
purging of fluid pump, 5-8
Q
quick-refill option, 2-10, 4-4
R
rear views, 2-8
repeatability, testing, 6-5
S
safety, 3-1
ESD precautions, 3-2
fluid, caustic or conductive, 3-2
operator safety precautions, 3-1
system safety precautions, 3-2
warning labels, 3-1, 3-3
safety interlock. See interlock, safety
scripted valve offsets, 5-5
scripted valve offsets, camera-assisted, 5-5
sensors
low air pressure, 13-12
magnetic fluid level, 13-14
needle, 2-6
over-the-board amplifier, 2-3
part, 2-5
service panel, 2-10
service shroud, 2-10
shutdown, 5-7
SMEMA compatibility, 2-5, 2-6, 4-2, 14-6
specifications
computer system, 4-4, 8-2
dual-action dispensing head, 13-6
heaters, part, 15-12
height sensor, 8-1, 10-17
motion system, 8-1
needle heater, 8-2, 12-7
system, 8-1